Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting
The
computer does
not
rec-
ognize
the
DVD-ROM
Drive Pack.
#
Check
the
settings
by
following the
instructions
in
"In-
stalling
/
Removing
a Device",
•
Is
the
DVD-ROM
Drive Pack
properly
mounted
in
the
multimedia pocket?
The
MP
indicator
@)
does
not
light.
Is
the disc
loaded on
the tray correctly?
Cannot
play
disc
or read
data
from
it.
Is
the disc bent, scratched, or dirty?
Cannot
eject disc.
Is
the
computer powered on?
To
remove
a
disc
when
the
computer
is
powered
off, in-
sert
a sharp object
such
as
the bent-out
tip
of
a
paper
clip
into the
emergency
hole.
Pushing
it
completely
to
the
end
will free
the tray
so
that
it
can be
pulled
out.
^^^^^^^^^^^^
A
blue
background
appears
on
the
screen with the
MPEG
image.
Did you open
the
DVD-ROM
drive or
remove
the disc
while
it
was
operating?
Re-insert the disc
and
close the
DVD-ROM
drive. Press
C
Enter).
The
disc
tray
does
not
close.
Did you
touch the
eject
button
when
you
close the iray?
E:
Windows XP
^^^i
When
the
DVD-ROM
drive
is
replaced
after
the
CD-R/
RW
drive (Optional) has
been
installed in the
Multimedia
Pocket,
files
inside the drive
sometimes cannot
be
ac-
cessed.
In
this
case,
execute [Scan
for
hardware changes]
using
the
following procedure.
1
Select
[Device
Manager]
in [start]
-
[Control Panel]
-
[Performance and Maintenance]
-
[System]
-
[Hardware].
2
Select the drive
displayed
under
[DVD/CD-ROM
drives]
(e.g.,
MATSHITA****),
then
select
[Action]
-
[Uninstall]
from
the
menu
and
select
[OK].
3
Select [Action]
-
[Scan
for
hardware
changes]
from
the
menu.
(Microsoft Corp. has reported
that
the
above
noted
problem
occurs.)
Cannot
access
file
for
DVD-
ROM
drive.
Werbung
Inhaltsverzeichnis
