Installing; Connecting - SanDisk ImageMate SDDR-88 Schnellstartanleitung

Before connecting the ImageMate 8 in 1 Reader/Writer to your computer, you may need to install
the device driver.
!
You can skip this section if your operating system is Windows XP, ME, Windows 2000 with
Service Pack 3, or Macintosh OS X v10.1.2–10.2.X and proceed to CONNECTING.
Install the Windows 98SE and Windows 2000 driver
(for systems with Windows 2000 and with SP1 or SP2 installed)
1. Insert the CD included with the ImageMate 8 in 1 device into the CD-ROM of your computer.
2. Left-click on the START menu and open the RUN menu. Click BROWSE to locate the drive
letter of your CD-ROM.
3. Select the setup.exe file and click OK. Follow the on-screen directions.
Install the Macintosh 9.1.X and 9.2.X driver:
1. Install the CD included with the ImageMate 8 in 1 Reader/Writer into the CD-ROM of your
computer.
2. Double-click the CD-ROM icon on the desktop and then run the USB Reader Installer
application for your Macintosh operating system. The Read Me file opens first.
3. Click Continue.
4. In the Installer Dialog, select USB Reader Installer in the drop-down menu and then click
INSTALL to install the device driver.
5. Follow the on-screen directions.
Connecting the ImageMate 8 in 1 Reader/Writer to the USB port is simple. You don't need to turn
off or restart your computer when attaching the ImageMate 8 in 1 Reader/Writer. And since the
ImageMate 8 in 1 Reader/Writer is powered by the USB connection, an AC/DC power adapter is
not needed.
!
Before connecting the ImageMate 8 in 1 Reader/Writer, complete the device driver
installation. See INSTALLING.
!
There are two ways to connect your ImageMate 8 in 1 Reader/Writer to your computer:
1. Insert the ImageMate into the Docking Station Cradle. Connect the Cradle cable to your
computer.
–or—
2. Use the extra Travel USB cable to connect your ImageMate to a computer directly (the
Docking Station Cradle is not required in this case)
When the ImageMate 8 in 1 Reader/Writer is connected for the first time, your computer may
display a message that the device is being installed. (May vary slightly depending on your
operating system.)
4

Installing

Connecting