Operation - Peltor FL6000-WS Gebrauchsanweisung

PELTOR ADAPTER FL6000-WS
Congratulations on your choice of product!
The FL6000 series of Peltor WS adapters has been tested and approved in
accordance with EMC directive 89/336/EEC, which means that it complies
with the requirements for CE marking.
Peltor WS adapters are designed to comply with the Bluetooth V.1.1 stand-
®
ard and are certified in accordance with:
EN 300 328 (radio test)
EN 301 489-1/-7-17 (EMC test)
EN 60 950 (electrical safety, low-voltage directive)
FCC part 15.247 (US and Canada radio test)
Please read carefully through these user's instructions in order to get the
maximum benefit from your Peltor Product.
FEATURES
Peltor's FL6000-WS series of adapters permit wireless connection of Peltor
headsets with most currently available models of communication radio on
the market.
Design
The adapter is enclosed in a rugged and functional sealed case without any
protruding parts. Its size is optimised for its purpose and it can be used in
your hand. It is also easy to carry around attached to your clothing, without
getting in the way or getting caught on other items.
On the rear of the adapter is a heavy-duty attachment clip (A), which can be
rotated through 360° so that the adapter can be used as conveniently and
flexibly as possible in all situations. The attachment clip can be removed if
there is no need to attach the adapter. The adapter also has an attachment
eye (B), which can be used to secure it if the attachment clip is not used.
Connecting cable
The output lead (B) has a plug for connecting to the chosen model of com-
munication radio or mobile phone. The lead is connected to the case by a
pliable and durable sleeve.
Pushbuttons
The two buttons for switching on and off (C) and pairing (D) are made of a
special soft plastic. They are located on the front of the case and shaped to
ensure ease of operation. The On/Off button has an LED that shows when
the adapter is on or off, as well as giving other information.
A Push-To-Talk (PTT) button can also be fitted to the adapter (at a Peltor
Service Center).
Power supply
Battery cover for easy battery replacement. Two 1.5-volt AA alkaline bat-
teries included. Peltor's ACK03 accumulator battery or other rechargeable
AA batteries can also be used . Two 1.5-V (AA) batteries give an operating
time of around 2000 hours on stand-by and around 70 hours of talk time.

OPERATION

1. Pairing
The Bluetooth link is established by pairing, which can only be done when
the adapter is switched off.
Set up your Peltor WS headset (or other Bluetooth device) for pairing.
5