Niko 05-200 Bedienungsanleitung Seite 60

05-200
error detection
When an error occurs, an '!' will appear on the display.
The error code can be viewed In the 'Check error' menu item.
1. Press briefly
2. Press briefly
3. Press briefly
Error #1: internal error, real time clock
Error #2: internal error, memory
Error #3: not applicable to PC-Link
Error #4: change time
Error #5: no voltage on the Nikobus.
memory function - memory
If calendar or presence simulations have already been programmed in the PC-Link, these
can be temporarily switched off so that they will not generate a bus telegram.
This is used if more sensors or bus push buttons have been installed after installation and
programming, and you wish to call up the addresses via the software.
58
and select the menu item.
in order to check and note down the error code.
in order to delete the error, return to the main screen.
[ CHECK ERROR ]
Memory
CHECK ERROR
No error [ > ]
EN