Linksys X2000
Setup > Basic Setup
The first screen that appears is the Basic Setup screen This allows you to change
the router's general settings
Auto/ADSL mode
ADSL mode (default) has the following fields that should be completed:
Language
Select your language
To use a different language, select one from the drop-
down menu The language of the browser-based utility will change five seconds
after you select another language
Internet Setup
The Internet Setup section configures the router to your Internet connection
Most of this information can be obtained through your Internet Service
Provider (ISP)
Internet Connection Type
Select the type of Internet connection your ISP provides from the drop-down
menu The available types are:
Bridged Mode Only
•
RFC 2684 Bridged
•
RFC2684 Routed
•
IPoA
•
RFC 2516 PPPoE
•
RFC2364 PPPoA
•
Bridged Mode Only
In this mode, only the DSL modem function is available, and all Gateway
features are disabled If selected, you only need to enter the VC Settings
RFC 2684 Bridged
If selected, enter the correct data for the IP Settings Select Obtain an IP
address automatically if your ISP allocates an IP address upon connection
Otherwise, select use the following IP address
Advanced Configuration
12