Using The Device; Cleaning Information - INNOCIGS Presence Clearomizer Bedienungsanleitung

INNOCIGS PRESENCE CLEAROMIZER – USING THE DEVICE
Operating instructions
Use the device only as described on the following pages. Prior to first use, you
must drip a few drops of your e-liquid onto the atomizer head. Open the Airflow
Control and inhale through the mouthpiece for 4 to 5 times WITHOUT holding the
fire button. Then let sit for 15 minutes to be totally soaked before first use.

Cleaning information

Use a dry cloth or cotton bud to clean the clearomizer. Do not clean the atomizer
head with water. If necessary, wipe it with a dry cloth. As they are wear parts,
atomizer heads must be changed regularly.
38
INNOCIGS PRESENCE CLEAROMIZER – USING THE DEVICE
Filling of E-Liquid (1)
Keep the device vertical with the mouthpiece
facing upwards to prevent e-liquid from leaking
out. Now unscrew the mouthpiece from the
InnoCigs Presence clearomizer. Pour the e-liquid
into the corresponding space, which is located
around the air pipe and has a filling volume of
1.9 millilitres. Ensure that no e-liquid enters
the centrally located air pipe. Reconnect the
mouthpiece to the clearomizer and ensure that
is does not leak.
Please note:
Make sure that the e-liquid level is between
10% and 90%.
39