Sabo 102 series Betriebsanleitung Seite 72

CONTROLS AND INSTRUMENTS
4.10 C
UTTING HEIGHT ADJUSTING LEVER
There are seven positions for this lever, shown as «1» to «7» on the label, which
correspond to various heights of between 3 and 9 cm.
– To go from one height to another, press the release button at the end of the
lever.
4.11 L
EVER FOR TIPPING THE GRASS
This lever, when pulled out from its hole, is to tip the grass-catcher to empty it and
reduce the effort required by the operator.
➤
For mechanical drive models:
4.21 C /
LUTCH
This pedal has a double function - during the first part of its travel it acts as a
clutch, engaging and disengaging drive to the wheels, and in the second part it
acts as a brake on the rear wheels
IMPORTANT
this can cause overheating and
damage the transmission belt.
NOTE
machine is in movement, keep
your foot off the pedal.
4.22 S
PEED CHANGE LEVER
This lever has seven positions for
the 5 forward speeds, the neutral
position «N», and reverse «R».
To go from one speed to another,
press the pedal (4.21) half way and
BRAKE PEDAL
It is important not to take too long in using the clutch as
When the
-
CATCHER
4.21
4.22
N
1 2 3
R
ENG 17
4 5