Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wait until the current time is displayed (the feeding is stored) or continue to set the next feeding.
Press UP to set the next feeding: the display shows 02oF
Press SET and set the second feeding time and food quantity as previously described
Press SET to confirm the second feeding
Wait until the current time is displayed (the feeding is stored) or continue to set the next feeding.
You can set up to 24 automatic feedings.
Reset
Press simultaneously DOWN and UP during 3 seconds to disable all set feedings.
On the display --:-- will appear briefly and the current time will be displayed.
The Fish feeder is back in default settings 01oN (one feeding at 10:00 h), next automatic feedings
are off (02oF, previously set feeding times and quantities remain stored).
The settings will be saved (temporarily) if there is a power failure/interruption. In the event of a long
power cut, the clock will no longer indicate the current time, in which case you will have to set the time
and feedings again.
Quantity of food
You can set the amount of the fish food in 10 steps. The quantity per step depends, among other
things, on the specific weight of the food used and pellet size. The indicated amounts of food in
the table below are average and based on the use of Hikari Staple. (We accept no liability for any
differences).
Small*
± 50 g
Medium
± 45 g
Large
± 30 g
* The reducer (insert ring) must be used with the Small granules.
6
01
02
03
± 100 g
± 130 g
01
02
03
± 90 g
± 150 g
01
02
03
± 65 g
± 100 g
04
05
06
± 160 g
± 200 g
± 250 g
04
05
06
± 200 g
± 250 g
± 300 g
04
05
06
± 135 g
± 170 g
± 200 g
02 n _ F
02 n _ �
07
08
09
± 300 g
± 350 g
± 400 g
07
08
09
± 375 g
± 450 g
± 500 g
07
08
09
± 230 g
± 270 g
± 300 g
10
± 450 g
10
± 550 g
10
± 330 g
Werbung
