Camera Reset - Instar In-9010 Bedienungsanleitung

8. Camera Reset

The IN-9010 Full HD camera can be reset through the online Web User Interface,
or by using the INSTAR camera tool. Both reset methods require a password to
access.
In case you forgot your password, you can also reset the camera through the
MicroSD card. Please refer to our online instructions for SD card access and SD
card reset:
2. After the reset, the camera will restart, which can take up to 60 seconds. All
data in the camera will be reset to factory defaults. Therefore, please follow our
installation steps that are introduced in Chapter 5 to reconnect the camera to
your network. For more information on how to install your camera again, please
visit: http://install.instar.com. Once you connect the camera to the network,
use the INSTAR Camera Tool to fi nd out the camera's IP address and open the
camera's WebUI to start confi gurating your camera again.
Go to http://install.instar.com
http://reset9010.instar.com
12-EN 12-EN