1.3 Connecting the mouse and receiver
•
Press the connect button on the receiver. The status indicator starts to flash.
•
Then press the connect button at the bottom of the mouse.
1.4 Low-battery indicator
If the batteries in the mouse are weak, the low-battery indicator on the upper
side of the mouse lights up (red). In this case, you should exchange the batteries
as soon as possible.
1.5 Switching the mouse on/off
Proceed as follows to switch the mouse off completely.
•
Press the left and right mouse button simultaneously for about 3 seconds.
•
The mouse is now switched off, i.e. it is not ready for operation.
•
Follow the same procedure to switch on the mouse.
Fig.4
Fig.5
Connect button
Status indicator
Scroll wheel
Low-battery indicator
6