Maintenance And Cleaning - VESTEL VHD60BS Bedienungsanleitung

6. Maintenance and cleaning

WARNING!
• Make sure that the on/off switch is in the "0" position.
• Unplug the power supply before cleaning the appliance.
• Always let the appliance and its components cool down before cleaning them.
• Do not use wipes or chemicals as these could damage the surface. Electrical/
electronic parts may not be cleaned.
• Maintenance and inspection should be undertaken on a frequent basis. If there is
any visible damage, a strong odour or excessive overheating of components, stop
using the appliance.
• Clean the appliance in accordance with instructions. Failure to do so may result in a
risk of fire.
To clean the appliance:
Task
Clean the stainless steel surface with a soft
cloth and lukewarm water. A cleaning fluid
suitable for stainless steel may be used.
NOTICE! Ensure that you wipe along the
grain of the stainless steel to prevent any
unsightly criss-cross scratch damage.
Clean the inlaid control panel with a soft
cloth and warm water with a mild neutral
detergent. Make sure that the cloth is clean
and not too wet before cleaning. Use a dry
soft cloth to remove any excess moisture.
Clean the mesh filters
Clean the active carbon filter
69 | VESTEL VHD60BS- VHD60BW- VHD90BS- VHD90BW
VHD60ASX- VHD60AWX- VHD90ASX- VHD90AWX
Frequency
Weekly
Weekly
Monthly (see Cleaning the mesh filters )
Every 3 to 6 months (see Replacing the
active carbon filter )