Axis 231D+ Installationsanleitung Seite 6

Installing the AXIS 231D+/232D+ in the Videotec DBH24K Dome Housing
Install the dome camera
Refer to the AXIS 231D+/232D+ Installation Guide for information on how to install the
dome camera using the exterior ceiling mount (dome camera bracket). The AXIS
231D+/232D+ Installation Guide is available from the Axis Web site at www.axis.com or
from the AXIS Network Video CD supplied with the camera.
Note:
Remove the plastic dome glass from the AXIS 231D+/232D+ once the camera has been installed in the
dome casing. Be careful not to damage the camera or lens during the installation.
Complete the installation
Once the camera has been installed and the IP
address has been set, fit the dome glass into the
slots on the inner dome casing and turn clockwise.
Align the holes for the safety screw and fasten the
screw securely.
The installation is now complete.
Important!
High voltage - the apparatus works on 230V AC. Always ensure that the power is disconnected before
starting any work or opening the housing. This product should be installed by certified electrical techni-
cians in compliance with local laws and regulations. Use cable glands and cables that are suitable for
external use and are in compliance with local laws and regulations.
safety screw