Technical Data; Eu Declaration Of Conformity - Chicago Pneumatic CP87029 Bedienungsanleitung

Safety Information

Technical data

Main data
Net Weight (kg) / (lb)
Load range (kg) / (lb)
Thread size (in)
Thread type
Max. air flow (ls) / (cfm)
Max. Pressure (bar) / (psi)
Oil Capacity (ml) / (oz)
Declarations

EU DECLARATION OF CONFORMITY

We, CHICAGO PNEUMATIC Tool Co. LLC,
1815 Clubhouse Road, Rock Hill, SC 29730, de-
clare under our sole responsibility that the product
(with name, type and serial number, see front
page) is in conformity with the following Direc-
tive(s): Machinery Directive 2006/42/EC
Harmonised standards applied: EN ISO 12100 :
2010
Relevant technical information can be requested by
authorities only. Pascal Roussy, R&D Manager,
CP Technocenter, 38 rue Bobby Sands, BP10273
44800 Saint Herblain, France
Saint-Herblain,
Pascal ROUSSY
Signature of issuer
5
CP87029
35 / 77
10 - 14 / 22 - 30
3/4
NPT
100 / 211
17 / 246
201 / 6.8
© Chicago Pneumatic - 8940175129
Safety
WARNING Risk of Property Damage or Severe Injury
Ensure that you read, understand and follow all
instructions before operating the tool. Failure to
follow all the instructions may result in electric
shock, fire, property damage and/or severe
bodily injury.
Read all safety Information delivered to-
►
gether with the different parts of the system.
Read all product Instructions for installation,
►
operation and maintenance of the different
parts of the system.
Read all locally legislated safety regulations
►
with regard to the system and parts thereof.
Save all safety information and instructions
►
for future reference.
Statement of use
The machinery described is intended for sustaining
the tool thanks to the suspension system and for
ensuring that the tool is optimally powered. No
other use permitted. For professional only.
Product specific instructions
Handling and installation
WARNING Do not stack the packaging as it
is not made to piled up.
WARNING Use adequate lifting and han-
dling means
The product is wrapped in anti-shock material and
is placed inside a cardboard package fixed to a pal-
let on the bottom. The tool support is separate from
the trolley.
Assembling the tool support
See figure 03.
• Connect the spring catch to the rod of the bal-
ancer.
• Insert the support onto the pivot.
• Turn the support in the required direction and
block it tightening the knob "A".
Ergo seat