vipow BAT1141 Bedienungsanleitung Seite 11

10. Incorrect use may result in electric shock.
11. Different batteries should not be mixed. Do not
mix batteries with different sizes or capacities.
12. ALWAYS disconnect this device from power
supply mains before cleaning.
13. Clean this device with soft, slightly damp cloth.
Do not use any abrasives or chemical agents to
clean this product.
CHARACTERISTICS
• Timer Control Protection
The unit stops charging if the charging time exceeds
10 hours.
• Reverse Polarity Protection
Electrical circuits protect the charger and batteries
from incorrect battery insertions.
Low Battery Current Leakage
Normally if the battery charger is not connected to
input power and the batteries are left in the charger,
the batteries will discharge. To minimize the loss of
charge, the charger will discharge the batteries using
the lowest possible current.
• Trickle Charge
Once the batteries are fully charged, there will still
be a small current applied to batteries to keep the
charged ‚topped up'.
• 0 Voltage Jump Start
Normally all batteries have some residual voltage
before charging. If the battery voltage is 0 V often the
chargers will not charge them up. This charger will
restore the charge even if the battery voltage is 0 V.
• Changeable plugs
Easily insert or remove plug.
EN