Installation Steps; Package Contents - Axis Q7411 Installationsanleitung

AXIS Q7411 Installation Guide
AXIS Q7411 Video Encoder
This installation guide provides instructions for installing a AXIS Q7411 Video Encoder on your
network. For all other aspects of using the product, please see the product User Manual, available
from www.axis.com

Installation steps

Follow these steps to install the AXIS Q7411 Video Encoder on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page page 6.
3. Install the hardware. See page 7.
4. Access the video stream. See page 7.
5. Unit connectors. See page 8

Package contents

Item
Axis video encoder models
Power adapter models
Mounting kit
CD
Printed Materials
Installation Guide
Models/variants/notes
AXIS Q7411
Type PS-K
• 4 screws and plugs to mount the encoder to a concrete wall
• 4 surface protection pads
• Terminal block connectors (I/O: 6-pin connector, RS-485/422: 2x 2-pin
connector, Power: 2-pin connector)
Installation and Management Software CD, including installation tools and
other software
AXIS Q7411 Installation Guide (this document)
Important!
This product must be used in
compliance with local laws and
regulations.
Page 5