Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. O
PERATING
Operating Modes
Preset Operation
This controller has preset color macros. There are nine color macros to choose from, which may be
accessed using the nine preset buttons. Please see the instructions below for this operation.
Press <PRESET> until the appropriate LED indicator lights.
1.
2.
Adjust the Fade/Speed/Strobe/Green Fader to the desired level to set the Fade Time.
3.
Adjust the Master Dimmer/Blue Fader to the desired level.
4.
Select one of the nine preset color macros.
5.
The Fade time and dimming may now be readjusted.
Please be sure that the Strobe, Blackout, and Manual RGB functions are not overriding the
controls.
Sound will not function in Preset Mode.
Chases Operation
This controller has preset color chases, which will change between one color and another. There are
several color combinations to choose from. Please see the instructions below for this operation.
Press <CHASES> until the appropriate LED indicator lights.
1.
2.
Adjust the Fade/Speed/Strobe/Green Fader to the desired level to set the Fade Time.
3.
Adjust the Master Dimmer/Blue Fader to the desired level.
4.
Using the Chases/Macro/Red Fader, select one of the color combinations.
5.
The Fade time and dimming may now be readjusted.
There are several preset color combinations that may be discovered by moving the
Chases/Macro/Red Fader through the full range of movement.
Please be sure that the Strobe, Blackout, and Manual RGB functions are not overriding the
controls.
Sound will function in Preset Mode.
Macro Operation
This controller has preset color macros. This is a static color selection, meaning that no chasing,
movement, or color flows of any kind will occur. There are several color macros to choose from,
which may be accessed using the Chases/Macros Fader. Please see the instructions below for this
operation.
Press <MACRO> until the appropriate LED indicator lights.
1.
2.
Adjust the Fade/Speed/Strobe/Green Fader to the desired level.
3.
Adjust the Master Dimmer/Blue Fader to the desired level.
4.
Using the Chases/Macro/Red Fader, select one of the color macros.
5.
The Fade time and dimming may now be readjusted.
Please be sure that the Strobe, Blackout, and Manual RGB functions are not overriding the
controls.
Sound will not function in Preset Mode.
4. Operating Instructions
I
NSTRUCTIONS
11
Werbung
Inhaltsverzeichnis
Fehlerbehebung
