Kenwood ProTalk TK-3301 Bedienungsanleitung Seite 23

Table Number
0
1
2
3
4
QT/ DQT SETTINGS
Quiet Talk (QT) and Digital Quiet Talk (DQT) are functions that
reject undesired signals on your channel. You will hear a call
only when you receive a signal that contains a matching QT
tone or DQT code. If a call containing a different tone or code
is received, squelch will not open and you will not hear the call.
Likewise, when transmitting using QT or DQT, the receiving
station must have a matching tone or code to hear your call.
Be aware that other parties can still hear your calls if they set
up their transceiver with the same tone or code.
The default QT/DQT settings for each channel are provided in
the table on page 15.
To change the QT/DQT settings of a channel:
1 With the transceiver power OFF, press and hold the PTT
switch and Side 1 key while turning the transceiver power
ON.
• Continue to hold the PTT switch and Side 1 key until the LED
lights orange and the transceiver announces "Self".
2 Release the PTT switch and Side 1 key.
• The transceiver announces "Channel".
3 Press the Side 1 or Side 2 key to select QT/DQT setup.
• The transceiver announces "Tone".
Operating
Frequency
OFF
446.00625 MHz
446.01875 MHz
446.03125 MHz
446.04375 MHz
Table Number
5
6
7
8
Operating
Frequency
446.05625 MHz
446.06875 MHz
446.08125 MHz
446.09375 MHz
13