Setting The Clock; Setting The Alarm; Setting The Calendar - Wohler THC 310 Bedienungsanleitung

2.3

Setting the clock

Press and hold the SET key during 2 seconds to enter the setting mode of the
clock. Time will blink in the display. Set the values observing the following se-
quence:
- 12 or 24 hours
- Hours
- Minutes
Press SET to toggle between the values and ADJ to set the above mentioned
values.
Press MODE to confirm the values.
2.4

Setting the Alarm

Press MODE until the alarm time appears.
Press and hold SET to set the alarm time.
First the hour will blink. Set the hour and minute by pressing ADJ. Confirm by
pressing MODE. The bell icon in the display shows that the alarm is activated.
You can also combine the alarm with the hour signal function (see hour signal).
2.5 When Alarm mode is active
When the alarm signal sounds, you can activate the snooze function by pressing
SNZ or you press MODE to deactivate the alarm. In this case the alarm setting
will stay for the next day. If the snooze function is active a Zz-icon will appear in
the display. In this case the alarm will repeat after 5 minutes. You can activate
the snooze function once more or you deactivate the alarm for a day by pressing
MODE.
2.6 Clock Hour signal
If the clock hour signal mode is active, every clock hour a signal will sound.
Press MODE until the alarm time is shown in the display. Now press ADJ until the
((0)) icon appears in the display. You can combine the two functions pressing
ADJ several times, so that both icons (bell and ((0)) appear in the display.
2.7

Setting the calendar

Press MODE until the year is shown in the display. Press and hold the SET key
until the year blinks. With the ADJ key you can set the year now. You can change
to the month by pressing SET. Here you can also set the month with the ADJ
12 Hotline: +49 2953 73-211 Fax: +49 2953 73-250
Wöhler THC 310