Product Description And Specifications; Technical Data - Berner BACDVC 12V-LI Originalbetriebsanleitung

OBJ_BUCH-2458-002.book Page 10 Thursday, September 7, 2017 5:51 PM
Product Description and
Specifications
Intended Use
The vacuum cleaner is intended for vacuuming dry
materials that are not harmful to one's health.
Use the vacuum cleaner only after
WARNING
having received sufficient infor-
mation on its usage. A thorough introduction re-
duces operating errors and injuries.
Product Features
The numbering of the product features refers to the
illustration of the vacuum cleaner on the graphics
page.
1 Release button for dust cup
2 On/Off button
3 Battery charge-control indicator
4 Handle
5 Battery pack*
6 Venting slots
7 Motor housing
8 Dust cup
9 Crevice nozzle
10 Intake port
11 Battery port
12 Battery unlocking button
13 Opening
14 Filter seal
15 Filter assembly
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Cordless dry vacuum
cleaner
Art. No.
Container volume l
Vacuum, max. hPa
Airflow, max. l/s
Weight according
to EPTA-Procedure
01:2014* kg
* depending on the battery pack being used
** limited performance at temperatures <0 °C
10 | English
Cordless dry vacuum
cleaner
Permitted ambient
temperature
– during charging
– during opera-
**
tion
storage
Recommended
batteries
Recommended
chargers
* depending on the battery pack being used
** limited performance at temperatures <0 °C
Assembly
Battery Charging
 Use only the battery chargers listed on the ac-
cessories page. Only these battery chargers are
matched to the lithium-ion battery pack used in
your vacuum cleaner.
Note: The battery supplied is partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before us-
ing your power tool for the first time.
The lithium-ion battery can be charged at any time
without reducing its service life. Interrupting the
charging procedure does not damage the battery.
The lithium-ion battery is protected against deep
discharging by the "Electronic Cell Protection
(ECP)". When the battery is empty, the machine is
switched off by means of a protective circuit: The
inserted tool no longer rotates.
 After the automatic shut-off of the vacuum
cleaner, do not continue to press the On/Off
button. The battery pack could become dam-
aged.
Observe the notes for disposal.
BACDVC 12V-LI
Battery Charge-control Indication
343770
The three green LEDs of the battery charge-control
0.4
indicator 3 show the charging status of the battery
45
5. The battery charge-control indicator only illumi-
15
nates for 3 seconds after start-up.
LED
Continuous lighting 3 x green ≥2/3
0.88–1.1
Continuous lighting 2 x green ≥1/3
Continuous lighting 1 x green <1/3
Flashing light 1 x green
When no LED lights up after switching on, then the
battery is defective and must be replaced.
BACDVC 12V-LI
°C
and during
°C
BBP 12V x.x Ah
BACP 10.8V S-B x.x Ah
Capacity
Reserve
1 609 92A 44U • 7.9.17
0...+45
–20...+50
BBC 12V
BACC 10.8V