Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Do not clean the device in the dishwasher.
• Remove any residual hair from the device after every use. Use the cleaning
brush provided for this task [14].
• Do not use any aggressive, caustic, abrasive or corrosive cleaning products
or hard brushes.
Cleaning the shaver heads [1] under running water
To clean the shaver heads [1] particularly thoroughly, you can rinse them
under running water. Proceed as follows:
1. Remove the shaver unit [3] from the device in an upward direction.
2. Push the shaver unit release button [2].
The shaver heads [1] open.
3. Hold the shaver heads [1] under running water
so that the stream of water runs through the
shaver heads [1] from the inside out.
4. When the shaver unit [3] is completely dry,
reassemble in reverse order.

8. Technical data

Model
Weight (incl. shaver unit [3])
2-in-1 beard and sideburn styler [12]
Device dimensions
Device protection class
Device protection class
Adapter protection class
Adapter protection class
Voltage supply
(SW-050100EU)
Battery:
Capacity
Nominal voltage
Type designation
Subject to technical changes
SMR 79
170 g
34 g
15.9 x 6.1 x 5.9 cm
III
IPX6
IP44
II
Input: 100-240 V~ 50/60 Hz 0.2 A
Output: 5 V
700 mAh
3.7 V
Lithium-ion
35
1000 mA

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis