Cleaning And Maintenance - Red Bull Racing SMR 79 Gebrauchsanweisung

1. Remove the
shaver unit [3]
from the shaver
if it is attached.
To do this, push
the shaver unit
[3] upwards using
your thumb as
shown.
3. Press the ON/OFF button
4. Slowly move the 2-in-1 beard and sideburn styler [12] over the required
areas to style your beard or sideburns.
5. When you have finished styling, switch the shaver off. Press the ON/OFF
button [4] to switch off the shaver.
6. Clean the 2-in-1 beard and sideburn styler [12] after every shave using
the cleaning brush [14] provided.
Pop-up contour trimmer [11]
The shaver has an integrated pop-up contour trimmer [11] to help you
shave or trim clean contours. To use it, proceed as follows:
1. Push the pop-up contour trimmer [11] lock downwards
as shown. The pop-up contour trimmer [11] flips up.
2. Press the ON/OFF button
3. Start to shave or trim clean contours using the pop-up
contour trimmer [11].
4. When you have finished shaving or trimming your
contours, switch the shaver off. Press the ON/OFF
button [4] to switch off the shaver.
5. Clean the pop-up contour trimmer [11] after every shave using the
cleaning brush [14] provided.

7. Cleaning and maintenance

Cleaning the device
WARNING
• Always pull the mains adapter [16] out of the socket before cleaning the
device. Risk of electric shock!
• Only clean the housing of the device with a soft cloth dampened with warm
water or with the supplied cleaning brush [14].
• Do not clean the device with highly flammable liquids. Risk of fire!
2. Attach the 2-in-1 beard and sideburn styler
[12] to the shaver from above until you hear
and feel it click into place. If you would like
to trim your beard or sideburns to 3 mm in
length, attach the comb attachment [13] to
the beard and sideburn styler from above.
[4] to switch on the shaver.
[4] to switch on the shaver.
34