Ortovox AVABAG Gebrauchsanleitung Seite 53

. If there is any air still in the AVABAG balloon (N)
when folding, this can be removed by repeatedly
pressing the deflation mark (E) on the outside
of the backpack.
. Completely close the zipper on the AVABAG
compartment (Z ) and make sure not to
catch the balloon fabric.
. Stow the zipper in the orange zipper garage (A )
to the left (see f.).
fold the right wing
WITH the RED
d.
eyelet!
e.
. Close the cover for the burst zipper (B) and make
sure that the yellow burst zipper (A) is not under
tension. Stow the loose tab under the cover for the
burst zipper (B) in the backpack.
. In the main compartment (Z ) push the orange
valve safety fastening (D) upward and secure it with
the orange hook and loop fastener (see page
. Arm the AVABAG system (P) by screwing in the
re-arming tool (see page
. Screw in a filled cartridge (see page
).
).
).
f.
A
EN
E
51