Charging The Smartphone With A Cable - Sks Compit+ Gebrauchsanleitung

Charging the Smartphone via the +COM/UNIT

Charging the smartphone with a cable

Should you have a smartphone that does not have a Qi charging function, you can charge it via the +COM/
UNIT using an optional USB cable as follows when you are on the road:
Ensure that the +COM/UNIT has been adequately charged (min. 50 %).
➤
Connect the optional USB cable (2) to the output port of the +COM/UNIT (2).
➤
Now connect it to your smartphone (1).
➤
To charge your smartphone, refer to the instructions in the section headed Charging the smartphone
➤
without a cable, please refer to page 33.
Carry out the following after you have charged your smartphone:
Disconnect the USB cable from your smartphone and from the +COM/UNIT.
➤
Remove your smartphone from the +COM/UNIT by turning it over the Qi docking station
➤
(approx. 45 degrees).
Press the safety lever and remove the +COM/UNIT analogue to the smartphone.
➤
Recharge the +COM/UNIT if necessary, please refer to page 37.
➤
G E R M A N Y
35