Mounting The Compit On The Handlebars Of The Bicycle And Removing It; Requirement - Sks Compit+ Gebrauchsanleitung

Mounting the COMPIT on the Handlebars of the Bicycle and Removing it

Mounting the COMPIT on the Handlebars of the Bicycle
and Removing it

Requirement

You can mount the COMPIT on the bicycle as long as your bicycle meets the following requirements:
Designation
B
Ø
Explanation
Maximum front-end width 49 mm
Diameter of the handlebars:
22.2 mm
25.4 mm
31.8 mm
G E R M A N Y
21