sks COMPIT+ Gebrauchsanleitung Seite 72

Mounting the COMPIT on the Handlebars of the Bicycle and Removing it
!
Use a torque spanner to mount the COMPIT on the handlebars of the bicycle. To do so, tighten the
➤
screws (7) applying the torque that is stated on the clamping arms (2 Nm) alternately and uniformly.
!
A non-uniform tightening of the screws when mounting the COMPIT on
the bicycle can result in the COMPIT becoming detached from the
bicycle and causing injuries.
➤ When mounting the COMPIT, tighten the screws alternately and uniformly.
G E R M A N Y
CAUTION
28