sks COMPIT+ Gebrauchsanleitung Seite 68

Mounting the COMPIT on the Handlebars of the Bicycle and Removing it
!
Use a torque spanner to mount the COMPIT on the handlebars of the bicycle. To do so, tighten the screws
➤
(4) alternately and uniformly applying the torque that is stated on the clamping arms (2 Nm).
Remove the COMPIT from the handlebars of the bicycle as follows:
Loosen the screws.
➤
Remove the COMPIT from the handlebars of the bicycle together with the clamping arms.
➤
!
A non-uniform tightening of the screws when mounting the COMPIT on the bicycle
can result in the COMPIT becoming detached from the bicycle and causing injuries.
➤ When mounting the COMPIT, tighten the screws alternately and uniformly.
G E R M A N Y
CAUTION
24