Velleman DVR4H2 Schnelleinstieg Seite 8

Quick menu bar
Note: only available when USB mouse is connected.
• Move the pointer towards the left of the monitor to open the quick menu bar:
Open channel switch panel.
Show playback control panel.
Zoom-in mode (select desired channel first before entering zoom-mode).
Select audio channel (live mode only live channels can be selected).
Enter PTZ mode and show PTZ control panel
Recording
• Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.
• When the auto-recording and pre-alarm functions are enabled, the device will start recording
images.
• Default the recording icon (
• In case the motion or alarm detection is activated and a motion or alarm is detected, the motion
( ) resp. alarm (
• When timed recording is enabled, the timed recording icon (
LED is on.
• Default, the device is in HDD overwrite mode and the icon (
Play-back
• Make sure the control panel is not locked and press the PLAY button on the control panel or use
the quick menu bar to open the playback control panel:
A progress bar
B playback control
C event search
Note: play-back needs at least 8192 recorded images to work properly (e.g. with IPS=30, the
recording must be at least 273 seconds long).
• The fast forward (
speed. Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).
• Press the pause button (
• Press the stop button (
• Press the SLOW button once to set play-back speed to 1/4
Search
• There are four ways to search recorded files: by record list, motion list, alarm list or by timer list.
• To search an event, press the LIST button on the front panel (make sure the control panel is not
locked). An overview of the recorded file types (ALARM, MANUAL, MOTION, SYSTEM and FULL
LIST) is shown.
• Select the desired list and recording from the list.
• Press ENTER to start play-back.
Note: the recorded files can also be searched via the included Video Viewer software.
13/09/2011
DVR4H2 - DVR4L6
) is shown.
) icon is shown.
) and fast rewind (
) to temporary suspend video play-back.
) to return to live monitoring.
) is showed and the timed recording
) is shown.
D information
E close
F
set repeat function A→B / open backup menu
) buttons will increase resp. decrease the play-back
th
and twice for 1/8
8
th
.
©Velleman nv