Set Absolute Measurement - SCHUNK PPU- E Series Inbetriebnahmeanleitung

3.2.6
Fig. 18 Set absolute measurement

set absolute measurement

This part is only required if Absolute measuring system is used.
(TTK 70)
1 Select the project explorer via the overview structure:
<IndraDrive> → <Motor, Brake, Measuring System> → <Motor
encoder> → <Reference between the motor encoder>
2 Bring the axis into the desired position and press the button
<Set absolute measurement>.
3 A desired offset shift can be entered in field
<Reference measurement>
commissioning
01.00|IndraDrive CS |en
51