JENCONS Powerpette Pro Gebrauchsanweisung Seite 7

Cleaning
Before cleaning disconnect from the mains charger. Do not clean the mains charger.
The Powerpette Pro / Powerpette
®
tants. The silicone pipette holder (9) can be autoclaved.
To remove the nosecone and pipette holder turn the nosecone anti-clockwise. When the nosecone is
removed the silicone pipette holder can also be disengaged from the filter by gently turning.
The hydrophobic filter (8) will require occasional replacement when wetted by the liquid and whenever
suction capacity is slowing.
6
Quicksilver can be cleaned with most common laboratory disinfec-
®
Pro & Quicksilver Operator Instructions
These parts are common to
the Powerpette Pro and
®
Powerpette Quicksilver
®