Safety Instructions - JENCONS Powerpette Pro Gebrauchsanweisung

Contents
The Powerpette Pro / Powerpette
®
(a) Powerpette pipette controller
®
(b) Charger; either
220V-240V 50/60Hz 3-pin (UK),
100V-120V 50/60Hz 2-pin (USA),
220V-240V 50/60Hz 3-pin (India) or
(c) Two spare hydrophobic filters, 1x 0.45µm and 1x 0.20µm
(d) Bench stand / wall bracket
(e) Instruction manual

Safety Instructions

The Powerpette Pro and Powerpette
®
lightweight and balance safely in the hand. The triggers have been carefully designed to
eliminate pressure points and control of intake and delivery is therefore made easier.
It is recommended when using deleterious liquids that the user wears protective clothing including
goggles and gloves. If in doubt ask your safety officer. Please consult and establish appropriate health
and safety practices applicable to the liquid being dispensed within your working environment.
WARNING!
• Only use this instrument within the recommended limits of its chemical resistance.
• Never use with fuming liquids which are incompatible with ASA, ABS, silicone, polyproplyene or chrome.
• Never use with highly flammable liquids.
• Observe the reagent manufacturer's safety information.
• Never use the instrument in an atmosphere with danger of explosion.
• When not in use store on bench stand or wall bracket.
• Never use force when in use.
• Should the instrument fail to work to specification stop pipetting and check instructions
headed Trouble Shooting (page 7).
• Only recharge with manufacturer's original charger.
• All repairs must be carried out by an authorized dealer.
• Only use the manufacturer's accessories and spare parts.
• Charger must only be used indoors and protected against moisture.
4
Quicksilver kit comprises
®
220V-240V 50/60Hz 2-pin (Europe),
100V-120V 50/60Hz 2-pin (Japan),
220V-240V 50/60Hz 2-pin (Australia)
Quicksilver have been designed with safety in mind. They are
®
Pro & Quicksilver Operator Instructions