Basic Photography And Playback; Taking A Picture - FujiFilm instax SQUARE SQ20 Bedienungsanleitung

EN

Basic Photography and Playback

Taking a Picture

This section describes basic operation for photography.
~
Slide the power switch to
Ÿ
Hold the camera.
!
Select the shooting mode or perform the steps to
select your image effects. (Pages 20 to 26)
⁄
Use the zoom ring to confirm the desired
composition of the final image.
@
Press the shutter button halfway to focus.
• If the camera is able to focus:
The camera beeps and the green focus frame
appears on the monitor.
• If the camera is unable to focus:
The red focus frame appears on the monitor.
Change the composition or use focus lock. (Page
22)
14
¤
(still picture).
• When you take a picture, hold the camera with both
• Be careful not to touch the lens surface when you
• When you press the shutter button fully, press it
• Be careful that your fingers or the strap do not cover
• If a subject is poorly lit, the flash may fire when the
Cautions on the camera's memory
• When the memory becomes full, the shutter will not
• Images in the memory may be damaged or lost if the
• If you request a repair, we cannot guarantee the safety
• While the camera is being repaired, note that we may
Lightly press the shutter button the rest of the way
down to take the picture.
The picture is taken and it is saved in the camera's
memory.
• See page 18 for the procedure to print an
image.
• If the print mode is set to auto print mode, the
image will be printed. (Page 30)
hands and brace your elbows against your sides.
press the shutter button.
lightly.
the flash, lens, or film ejection slot.
picture is taken. You can change the flash setting to
disable flashing. (Page 23)
release and you cannot take a picture. Delete the
images in the memory or use another memory card.
camera has any trouble. We recommend you store
important image files as backup using other media
(e.g. Hard disk, CD-R, CD-RW, or DVD-R, etc.).
of the images stored in memory.
check the contents of images in the memory.