Telcoma PASSO Installationsanweisungen Seite 53

GB
CANCELLATION OF THE USER CODES
One or more user codes can be cancelled at any time from the recei-
ver's memory.
·
press and hold the key for approx. 2 seconds until the keypad be-
eps once.
·
introduce the MASTER code followed by , the LED
·
enter 60# , the LED
·
enter the user code to cancel followed by . The keypad will beep
and the LED
·
Repeat the operation to cancel additional user codes.
Example
I want to cancel the user code 789
# 2233#
2 sec. MASTER code command
CANCELLATION OF ALL MEMORISED USER CODES
All user codes can be cancelled from the receiver unit's memory with a
single command:
·
press and hold the key for approx. 2 seconds until the keypad be-
eps.
·
introduce the MASTER code followed by , the
·
enter 70# , the
·
Introduce the MASTER code again followed by , the buzzer beeps
once and the
Example
I want to cancel all memorised codes
# 2233#
2 sec. MASTER code command
#
☼ starts to flash.
☼ switches off.
60#
#
☼ LED starts to flash.
☼ LED switches off.
70#
# ☼
#
789#
code to be cancelled
# ☼ LED switches on.
#
2233#
MASTER code
remains on.
53