Telcoma PASSO Installationsanweisungen Seite 49

GB
MEANING OF NAMES AND SOUNDS
MASTER code
This code is used by the installer for the programming of the entire
system. The factory set code is 12345678. The replacement of this co-
de should be the first programming operation to be performed.
USER code
This is the code that is used by the user. When programming, the
length of the code from 1 to 8 numbers can be decided.
Buzzer sounds:
As already mentioned in the keypad, a buzzer is present that makes a
sound during the various phases:
·
"beep": each time a key is pressed
·
"beep" with a different tone: signals that the operation has been per-
formed
·
"beep beep": exit of the programming due to time-out
·
"beep beep beep beep": signals an error
·
10 beeps: signals a fault or no line
49