weidner WASCHBOY Bedienungsanleitung Und Wartungsanleitung Seite 9

Electrical connection and safety measures through handling with
electrical energy:
The electrical connection of the high pressure system must be carried out by a qualified
-
electrician and comply with IEC 364
- On site, in the electrical system , must installed either a fault-current circuit breaker, which
interrupt the main voltage when the fault current exceeds 30mA during 30ms or mount an
earth tester
- Work at the electrical installation of the system may only be carried out by a qualified
technician
- The voltage indicated on the type plate must comply with the voltage of the power source
- The power supply must be fused according to system type / type plate or our allowance.
- A higher fuse is not allowed
- Electrical connection and network main fuse to be installed only by a professional
- The system must be correctly installed according to instructions of VDE and EVU at socket /
distribution.
- Connect the system only to a proper power source
- Check the plug, respectively supply cable for damage
- Do not connect a damaged cable
- For replacement or renewal of the supply cable only the original supply cable of the
manufacturer must be used, order number see spare parts list
- Electrical connections must be clean as well as dry and should not lie on the floor
- Do not touch the plug with wet hands
- By using an extension cable, the plug and coupling must be made of a waterproof construction
- Unsuitable extension cables can lead to death
Reinigungssysteme
die sauberste Lösung
thecleanestsolution
9
.........