Using The Camera - Kerbl 322080 Bedienungsanweisung

Notes for camera:
• If the battery is empty please recharge it using the charging cable.
• Always keep the weatherproof cover fitted regardless of conditions.
CAMERA LED INDICATOR
Red on
Off
Green on
Yellow on
Notes for receiver:
• A full charge will take about 2.5 hours, which can power the receiver for about 2 hours continuously.
• You are recommended to have the battery fully charged before its first installation to optimize its life.
• Do not burn or disassemble the Li-battery.
• Do not short-circuit the battery as it may cause fire or electric shock.
RECEIVER LED INDICATOR
Red on
Off
Green on

Using the Camera

1. Before using make sure the camera is fully charged. Adjust the camera Power ON/OFF/channel button to power on
your camera (set channel 1)
Camera
2. Mount the Magnetic Camera, and then adjust it to a suitable angle.
Be sure that there is the same channel on camera and on LCD monitor
Charging when power is off
Power off (disconnect with cigarette lighter)/Finish charging
Power is on
Charging while power is on
Charging while power is off
Power off (disconnect with cigarette lighter)/Finish charging
Power is on
STATUS
STATUS
19