ASROCK 939NF4G-SATA2 Bedienungsanleitung Seite 19

Before you start to configure the RAID function, you need to
check the installation guide in the Support CD for proper configuration.
Please refer to the document in the Support CD, "Guide to SATA Hard
Disks Installation and RAID Configuration", which is located in the folder
at the following path:
.. \Information\Manual\RAID Installation Guide
After step1, 2, 3, you can start to install Windows 2000 / Windows XP / Windows XP
64-bit.
NOTE. If you install Windows 2000 / Windows XP / Windows XP 64-bit on IDE HDDs and
want to manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII
HDDs, you still need to set up "SATAII Operation Mode" to [RAID] first. Then, please
set the RAID configuration by using "RAID Utility for Windows Guide" in Windows
environment. Please refer to the document in the Support CD, "Guide to nVidia RAID
Utility for Windows", which is located in the folder at the following path:
.. \Information\Manual\RAID Utility for Windows Guide
2.11 2.11 Untied Overclocking T Untied Overclocking T
2.11 2.11 2.11 Untied Overclocking T Untied Overclocking T Untied Overclocking Technology
This motherboard supports Untied Overclocing Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI and PCIE buses are in the fixed mode so that FSB
can operate under a more stable overclocking environment.
ASRock 939NF4G-SATA2 Motherboard
echnology echnology
echnology echnology
1 9 1 9 1 9
1 9 1 9