Driver Installation - Manhattan 158169 Handbuch

Serial PCI Express Card • User Manual
Thank you for purchasing the MANHATTAN
For specifications, go to www.manhattan-products.com.
Card Installation
1. Turn off your computer.
2. Unplug the power cord and remove your computer's cover.
3. Remove the slot bracket from an available PCIe slot.
4. Carefully align the card's bus connector with the selected PCIe slot on the
motherboard. Push the board down firmly.
5. Replace the slot bracket's holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.

Driver Installation

After the card is installed, insert the included driver CD in the CD-ROM drive.
For Windows 2000:
1. On the initial Found New Hardware Wizard screen, click "Next. "
2. When the Install Hardware Device Drivers screen displays, select "Search for a
suitable driver for my device (recommended), " and click "Next. "
3. Select "CD-ROM drives, " de-select the other options, then click "Next. "
4. Click "Next, " then "Finish. "
5. Repeat the procedure.
For Windows XP/Server 2003/Vista/7 and 64-bit Versions:
1. On the Found New Hardware Wizard screen, select the recommended "Install"
option, then click "Next. "
2. On the next screen accept the default entry (if presented), then click "Next. "
3. Click "Finish" or "Close" to complete the installation.
Verification of Driver Installation
1. In the Control Panel, go to System Properties.
2. Click on "Device Manager. "
3. Confirm that "PC Express UART Port" is listed twice under "Ports (COM & LPT)" and
that "PCI Express Multiport Serial Adapter" is listed once under "Multi-port serial
adapters. "
2
English
Serial PCI Express Card, Model 158169.
®
English