Mac Installation - Manhattan 150965 Kurzanleitung

SATA 3 Gb/s RAID PCI Express Card • Quick Install Guide
Thank you for purchasing the MANHATTAN
Card, Model 150965 (2 external ports) or 160377 (2 internal ports).
This guide presents the basic steps to set up and operate this device. For detailed
instructions and specifications, refer to the user manual on the CD enclosed with
this product or visit www.manhattan-products.com.
Installation
1. Turn the system off. Connect the hard drives to the PCI Express Card and
position the card in a PCI Express slot. Turn the system back on.
2. During OS bootup, Windows will display the Found New Hardware Wizard
screen. Click "Next. "
3. Select "Search for a suitable driver for my device (Recommended)" and
click "Next. "
4. Insert the driver CD in your CD-ROM/DVD drive; check "Specify a location";
uncheck the other boxes: click "Next"; type in "E:\" (or whatever designates
your CD-ROM/DVD). Click "Browse. "
5. Select a location; e.g., "E:\SATA PCIe_Raid5_2Port\SiI3132\Windows\
Driver. " Click "Open, " then "OK. "
6. When the wizard indicates that it found a driver for the device, click "Next. "
7. If the "Digital Signature Not Found" message appears, click "Yes" to
continue installing the driver.
8. The wizard will now copy the required files to the system and start the
driver. When the wizard displays a completion screen, click "Finish" to exit
the wizard.
Verifying the Installation
1. Right-click on "My Computer"; select "Properties"; click the "Hardware" tab;
click "Device Manager. "
2. Double-click "SCSI and RAID Controllers. " If there is no yellow "!" or "?" in
front of "Silicon Image SiI 3132 SoftRaid5 Controller, " the driver has been
installed correctly.
3. For information about the devices attached to the card, use the SiICfg
Utility and select a device from the list.

Mac Installation

When using the card as a non-bootable adapter on a Mac, refer to the Mac
drivers in the Mac OS folder on the included driver CD.
2
ENGLISH
SATA 3 Gb/s RAID PCI Express
®
English