Herunterladen Inhalt Inhalt Diese Seite drucken

Ecler MIMO4040DN Handbuch Seite 18

Digitale matrix mit dante-schnittstelle
Inhaltsverzeichnis

Werbung

Output Gain (x40)
Input Delay (x40)
Output Delay (x40)
Parametric Eq. Types
(4 max per input)
(8 max per output)
High & Low pass output Crossover
filters (x40)
Input Noise Gate (x40)
Input Compressor / Limiter (x40)
Input Frequency Shifter (x40)
(Feedback Loop Reducer)
Output Limiter (x40)
Mute: Yes
Solo: Yes
Signal Polarity reverse: Yes
Metering: VU+clip pre & post fader
Range: from 0 to +6 dB
from 0 to 1000 ms
Units: sec/ms/m/cm.
from 0 to 1000 ms
Units: sec/ms/m/cm.
Bypass / On-Off all channels
Param Eq. Freq: 20Hz-20kHz;
Gain: -60/+12 dB
Q: 0.3 to 200
Low & High Shelf 6/12 dB/oct
Low & High Pass 6/12 dB/oct
All Pass 1/2 order
Bypass On-Off
Butterworth in 6/12/18/24 dB/oct
Bessel in 12/18/24 dB/oct
Linkwitz-Riley in 12/24 dB/oct
Bypass On-Off
Threshold: from –80 dBV to +18 dBV
Depth: 0 dB to 80 dB
Attack time: from 0,1 ms. to 500 ms.
Hold time: from 10 ms. to 3000 ms.
Release time: from 10 ms. to 1000 ms.
Bypass On-Off
Threshold: from –36 dBV to +18 dBV
Knee: hard / soft
Attack time: from 0,1 ms. to 500 ms.
Release time: from 10 ms. to 1000 ms.
Make up gain: from 0 to +10 dB
Per input. ON / OFF function
Bypass On-Off
Threshold: from –36 dBV to +18 dBV
Attack time: from 0,1 ms. to 500 ms.
18

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis