Assembly - Disty Distynotruf Bedienungsanleitung

Assembly

Now mount the device, for example on a plastic tile using two
sheet screws. For other assembly locations, for example on
the wall or on a wooden board, please use the appropriate
materials.
As an example, here are the working steps for
assembly on the wall:
1. Drill two holes with a diameter of 6 mm at a distance
of 48 mm into the wall.
2. Insert the anchor bolts.
3. Now stick the screws through the mounting holes on the
distyNotruf stationär
the device.
4. Check for proper
functionality by
pushing the button!
Operating instructions
and tighten the screws to mount
56,3
48,3
23
EN
17