Montage- und Anschlussanleitung / Sicherheitsrelaisbaustein
Mounting and wiring instructions / Safety relay module
Sicherheitsbestimmungen
Das Gerät darf nur von Personen installiert und in Betrieb
genommen werden, die mit dieser Montageanleitung und
den geltenden Vorschriften über Arbeitssicherheit und Un
fallverhütung vertraut sind.
Bestimmungsgemäße Verwendung
Der Sicherheitsrelaisbaustein ist bestimmt für den Einsatz
in:
•
NotHaltSchaltungen nach EN 418 (EN 60 94755)
•
Schutztürüberwachungen nach EN 1088
Die Sicherheitsfunktion ist definiert als das Öffnen der Frei
gaben 1314, 2324 und 3334 beim Öffnen der Eingänge
S11S12 und/oder S21S22. Die sicherheitsrelevanten
Strompfade mit den Ausgangskontakten 1314, 2324 und
3334 erfüllen die Anforderungen der Kategorie 4 nach DIN
EN 9541:1997. Unter Berücksichtigung einer B
Betrachtung werden folgende Anforderungen erfüllt (siehe
auch „Angaben im Sinne von DIN EN ISO 13 8491"):
•
Steuerungskategorie 4 – PL e gemäß DIN EN ISO 13 849
1:2007
•
entspricht SIL 3 gemäß DIN EN 61 5082:2002
•
entspricht SILCL3 gemäß DIN EN 62 061:2005
Um den Performance Level (PL) gemäß DIN EN ISO 13 849
1:2007 der gesamten Sicherheitsfunktion (z. B. Sensor,
Logik, Aktor) zu bestimmen, ist eine Betrachtung aller
relevanten Komponenten erforderlich.
Safety regulations
The unit may only be installed and operated by personnel
who are familiar with both these instructions and the current
regulations for safety at work and accident prevention.
Authorised applications
The safety relay module is for use in:
•
Emergency stop circuits to EN 418 (EN 60 94755)
•
Guard monitoring to EN 1088
The safety function is defined as follows: The enabling out
puts 1314, 2324 and 3334 are open, when the inputs
S11S12 and/or S21S22 opens. The safety related current
paths with the output contacts 1314, 2324 and 3334 fulfil
the requirements of the safety category 4 according to DIN
EN 9541:1997). In consideration with a B
lowing requirements were fulfilled (refer also to "Information
Wert
within the meaning of DIN EN ISO 13 8491"):
10d
• control category 4 – PL e acc. DIN EN ISO 13 849-1:2007
• is equivalent to SIL 3 acc. DIN EN 61 508-2:2002
• is equivalent to SILCL 3 acc. DIN EN 62 061:2005
For designation of the performance level (PL) acc. DIN EN
ISO 13 8491:2007 of the whole safety function (e.g. sensor,
logic, actor) a view to all relevant components is necessary.
SRB 301MC
value the fol
10d
11