VESTEL VHI90AX Bedienungsanleitung Seite 47

• If you use the cooker hood with a diverter:
i. Place bracket 2 against the ceiling. Determine the position of the two
holes. The two holes should be located in the centre of the hanging
board.
ii. Remove bracket 2. Drill the two holes with the 8mm drill.
iii. Insert two wall plugs.
iv. Attach bracket 2 with two 4mm × 30mm screws.
v. Attach bracket 1 to the diverter with two 4mm × 8mm screws.
vi. Place an adjusted pipe on each sides of the diverter. Adjust the
distance. Attach each adjusted pipe with a 3mm × 12mm screw.
vii. Attach bracket 1 to bracket 2 with two 4mm × 8mm screws.
47 | VESTEL VHI90AX
45
45
Adjusted pipe
45