Error Message; Technical Data - ratiotec RTP 700 Bedienungsanleitung

[EN]

Error message

Error light
Continuously red
Blinks red twice per second (every 500ms)
Blinks red twice and then turns solid red for 5 seconds Overvoltage of the device. In this case, please verify
Power light
Continuously red

Technical data

Functions
Power supply
Voltage
Battery
Effective printing width
Printing paper
Interface
Optional accessories
Measurements (L x W x H in mm)
Weight in kg
6
Causes and solutions
The paper roll is empty. Insert a new paper roll.
Overheating!
Please turn off the device immediately and let it rest
for a few minutes until the temperature has dropped
significantly.
whether the appropriate power supply is used.
Causes and solutions
Low battery. Charge the battery.
RTP 700
Mains cable or rechargeable battery
8.4V DC | 1,5 A
Polymer Lithium rechargeable battery | 1,500 mAh
48 mm
Paper: Thermal receipt paper
Width of the roll: 58 mm
Maximum diameter of the roll: 40 mm
Serial connection | USB | Bluetooth
Rechargeable battery | paper rolls
106.5 x 78 x 47
0,19