FISCHER RACE PRO SKATE IFP series Montageanleitung Seite 40

6. ENTRY / EXIT
6.1 MANUAL MODELS
1
3
5
40
2
4
6
1. To enter the binding, open the Turn Lock mechanism by turning it 90° to the
left or the right.
2. Position the boot over the binding so the boot axis comes into contact with
the lock opening of the binding. Raise your heel slightly at the same time and
press down with your toes.
3. Close the Turn Lock mechanism by turning it until it snaps into place.
4. To exit the binding, open the Turn Lock mechanism by turning it 90° to the
left or the right.
5. Step out of the binding with the boot.
6. Close the Turn Lock mechanism by turning it until it snaps into place.
WATCH VIDEO:
TURN LOCK