Sliding On The Binding - FISCHER RACE PRO SKATE IFP series Montageanleitung

5. MOUNTING BINDINGS

5.1.2 SLIDING ON THE BINDING

1
3
34
2
4
1. Open the Double Lock Slider by pushing it back as far as the stop point.
2. Place the end of the front section of the binding at the beginning of the IFP
front plate.
3. Slide the binding onto the IFP plate from the front to the back until 0 appears
in the Positioning Window. Make sure that the heel part of the binding is also
pushed onto the Guide Rails of the IFP heel section.
4. Close the Double Lock Slider by pushing it forward.
WATCH VIDEO:
EASY TO MOUNT