5. MOUNTING BINDINGS
5.2.2 SLIDING ON THE BINDING
1
3
38
2
4
1. Place the end of the front section of the binding at the beginning of the IFP
front plate.
2. Lift the Clip Lock.
3. With the Clip Lock raised, slide the binding from the front to the back onto
the IFP plate until 0 appears in the Positioning Window. Make sure that the
heel part of the binding is also pushed onto the Guide Rails of the IFP heel
section.
4. Release the Clip Lock. Make sure the Clip Lock snaps into place properly.
WATCH VIDEO:
EASY TO MOUNT