Fixing The Heel Piece / Pre-Adjusting Boot Size - FISCHER RACE PRO SKATE IFP series Montageanleitung

5. MOUNTING BINDINGS

5.1.1 FIXING THE HEEL PIECE / PRE-ADJUSTING BOOT SIZE

NB: If the heel piece has not been fixed yet, start with #4.
1
3
5
33
2
4
6
1. Turn the binding over so it is upside down.
2. + 3. Pull out the connecting pieces of the heel section by pressing them
together.
4. Select the desired boot size with the boot size marking reaching the rear
edge of the front section of the binding.
5. Insert the heel piece into the matching snap-fit hooks on the side by gently
turning the connecting pieces.
6. Turn the binding over so it is the right way up.
WATCH VIDEO:
HEEL PRE-ADJUST