Sharp DR-I470 Bedienungsanleitung Seite 8

your selection, press the LEFT button to go back to the other alarm
settings.
• Select "Time" and turn the Select Knob to highlight the alarm hour.
Once you have found the desired hours, press RIGHT button to
change the minutes.
• Once the minutes are at the correct value, press RIGHT button to
change "AM" or "PM",then press the OK button to con rm and go
back to alarm settings.
• Now scroll down and select "Sound" by pressing OK button. You can
now choose between Beep, melody, Internet Radio, FM, or DAB/DAB+.
• If you are setting your alarm sound as Internet Radio, FM or DAB/DAB+
then you will now be taken through your preset favourite stations.
Select your chosen alarm station by pressing down the OK button.
• The alarm symbol will show on the main display screen.
• How to cancel your alarm
• To cancel your alarm, select "Alarm" in Con guration settings or with
the ALARM button and select the alarm you wish to turn o .
• Once the alarm is selected, you will have the option to turn o or on.
Highlight the "Turn Off option and press the OK button to con rm.
NOTE: Change the alarm volume by going to " Alarm
Volume" setting in the Alarm setting screen.
• How to turn off your alarm when sounding
When your alarm is sounding, press the ALARM or STANDBY button on
the remote control to stop the alarm . If you have set an alarm to sound
everyday or more than once, the alarm icon will still remain on display
screen.
• How to put your alarm on SNOOZE
When your alarm is sounding, press any button except STANDBY or
ALARM to stop the sound and put into SNOOZE mode. The SNOOZE
function will make the radio sound again after 5 minutes.
NOTE: Stop the SNOOZE alarm by pressing the ALARM or STANDBY button.
• Nap Alarm
• After selecting the "Alarm" option in Con guration settings, or the
ALARM button on the remote control to select the "NAP Alarm(Turn
Off )".
• Choose how many minutes you would like to have the nap alarm on
with the option of : Turn O , 5 Minutes, 10 Minutes, 20 Minutes, 30
Minutes,60 Minutes, 90 Minutes, 120 Minutes.
• Alarm Volume
• Change the alarm volume by rotating the Volume Knob or the LEFT /
RIGHT buttons to change.
• Once the correct sound volume has been chosen, press the OK button
to con rm.
Timer
• In "Confi guration" settings, select the option for "Timer" and a screen
with 00:00 will display.
• To go up in seconds, click the RIGHT button. To go down in seconds,
click the LEFT button. Press and hold the LEFT/RIGHT buttons to move
through the timer quickly.
• Once you have chosen the correct timer amount, con rm it by pressing
the OK button.
Language
Select your chosen language within the list.
Dimmer
• To set the brightness of your radio, go to "Confi guration" settings and
select "Dimmer" . You can choose "Power Saving" or "Turn on" mode.
• Select "Power Saving" mode to change one of your brightness levels
with the choice of up to 20 levels. When there is no activity of the radio
for 15 seconds, this lower brightness level will set until a button is clicked
and the "Turn On" setting will activate.
• Select "Turn On" mode to be the brightness for when the radio is active
and in use.
• Alternatively, you can alter two brightness settings by pressing DIMMER
button on the remote control on front panel directly.
Display
Choose the display to be Color or Monochrome.
Power Management
Select this to con gure the radio to go into Standby mode automatically
after a set time of inactivity or if there is no WIFI signal. You can select
5/15/30 minutes to go into Standby mode, or you can select "Turn Off " to
ignore this function.
Sleep Timer
• To set a sleep timer, go to "Confi guration" settings and select "Sleep
Timer", You can choose Turn Off , 15, 30, 60, 90, 120, 150, 180 minutes.
• Alternatively, you can repeatedly press the SLEEP button on the remote
control to switch between sleep times on the top right of the display
screen. There is an option between 15, 30, 60, 90, 120, 150, 180
minutes.
• Once Sleep Timer has been selected, the timer amount and a sleep
image will show on the top right of the display screen.
Buff er
Con gure the bu er time of the music playback: 2 /4 /8 seconds.
Weather
• Set location: Choose and enter your location.
• Temperature Unit: Choose your preferred temperature "Celsius" or
"Fahrenheit".
• Show on Standby: Choose "O " or "On" to deactivate or activate the
weather forecast display on the standby screen. When you activate the
weather forecast display , it will display on the Standby screen every 10
seconds.
FM Setup
• Mode: You can set "Mono" or "Stereo" mode.
• Threshold: Select threshold settings (seek threshold/Stereo threshold).
• (Threshold is to set to the auto-switching between mono and stereo
modes. When in a week reception place, the system will switch to the
mono mode automatically to reduce the background noise of the
station, so that to be more clearly listening.)
Local Radio Setup
Manually set up your location for Local radio rather than allowing the radio
to Auto Detect.
Playback Setup
Select the playback mode of the Media Center: O , Repeat All, Repeat one,
Shu e.
Device
Default name for DLAN is "AirMusic". You can rename the device for DLAN
setup.
Key
In this setting interface, you can select "Alarm", "Dimmer", "Equaliser",
"Local Radio", "Mode", "Preset", "Sleep Timer" and "Timer" to con rm
the function of the MODE button on the front panel and the remote
control.
Equaliser
Default EQ is normal. You may change it to Flat, Jazz, Rock, Soundtracks,
Classical, Pop, News or my EQ.
Resume when power on
Turn on the function for the radio to resume when powered on. Instead,
the screen will remain in main menu.
Software Update
Will show here if a software update is available for the radio. If one is
available, please select for the update to initiate.
Reset to Default
Select this option to reset your radio and revert all of the settings and
presets made. Con rm that you would like to reset the unit and its settings
by selecting "YES".