Ec Declaration Of Conformity - Husqvarna K 770 Dry Cut OilGuard Bedienungsanweisung

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE–561 82 Huskvarna, Sweden, tel:
+46–36–146500, declares under sole responsibility that
the portable cut-off machine Husqvarna K 770 Dry Cut,
K 770 Dry Cut OilGuard, dating from 2018 serial
numbers and onward (the year is clearly stated on the
type plate, followed by the serial number), comply with
the requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery"
2006/42/EC.
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC. Conformity assessment
according to annex V.
For information relating to noise emissions, see
Technical data on page 136 .
The following standards have been applied: EN ISO
12100:2010, EN ISO 19432:2012
RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden, has performed voluntary
type examination in accordance with the machinery
directive (2006/42/EC) on behalf of Husqvarna AB. The
certificate has the number: SEC/10/2285.
Notified body, RISE SMP Svensk Maskinprovning AB,
Box 7035, SE-750 07 Uppsala, Sweden, has certified
conformity with annex V of the Council's Directive of
May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC. The certificate has the
number: 01/170/037
Partille, October 15, 2018
Edward Gulis
Global R&D Director
Construction Equipment Husqvarna
(Authorized representative for Husqvarna AB and
responsible for technical documentation.)
138
EC Declaration of Conformity
861 - 004 - 27.02.2019