Setting The Time; Setting The Date; Using The Chronograph - Lotus ILM6S30 Betriebsanleitung

SETTING THE TIME

VISUALIZACIÓN Y BOTONES
1. Pull the crown out to the 2nd Click Position.
2.
Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.

SETTING THE DATE

1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not
change on the following day.
3. After the date has been set, push the crown back to the Normal position.
ILM6S30 ILM6S30
16
ILM6S30 ILM6S30

USING THE CHRONOGRAPH

VISUALIZACIÓN Y BOTONES
This chronograph is able to measure and display time in 1/20 second united up to
maximum of 59min, 59sec. The chronograph 1/20 second hand keeps continuously for
30 seconds after starting, and then stops at Zero position.
[Measuring time with the stopwatch]
1. Press button " A " to start the chronograph.
2. The chronograph can be started and stopped each time button "A" is pressed.
3. Press button "B" to reset the chronograph and chronograph minute and second
hands return to their Zero positions.
Reset
measurement
Time
Stop
17